Fair prices with a selection of everyday household items with an ever changing couple of rows of random interesting items! Staff are always kind and courteous.
Advertisements
Tag: craft
Nautical Clock
Things needed:
Clock with preferably raised designs
Small Screw-Driver (Dependent on clock assembly)
8 Finisher Nails
Clay (Sculpey or FIMO or in this case both)
To start off, I chose and mixed and rolled the following colors to create a fake ‘stick’. Clay brown, gold orange, dark brown, light brown, red, white, lemon yellow, black, blue and dark brown.
I chopped the stick into 16 pieces, 8 at 1 inch each, and 8 one and a 1/2 inch. The 1 inch I rolled into circles, and the 1 1/2 inch and rolled the ends to create a smooth oval bead.
I disassembled the clock, removed the rim, and made eight evenly spaced marks on the inside, then put a nail through each one, directly center on the band. I then poked the beads onto the nails like so.
I removed each set of beads, trying to keep them attached to each other, and baked at 175 for 40 minutes.
After re-attaching the now cooked beads, I mixed dark brown, gold and bronze, and painted the inner rim, leaving the silver raised dots in the middle as silver to make the ‘rivets’ pop.
Once the paint was dry, I reassembled and Viola!
Clay Shiatsu Pendant
Things needed:
Clay Tools
Toothpicks
2 inch of wire
Clay (Sculpey or FIMO or in this case both)
To start off, I chose/mixed the below colors, Clay brown, gold orange, dark brown, light brown, red, white, light yellow, orange, and dark brown.
First I rolled out a line of white, and rolled out two balls of using all the colors of brown, to make a base to build on.
I bent a two inch wire into an U, put it on the base, and covered it with chunk of white pressed to about this shape:
With toothpicks I began to pick at the clay and poke at it till it looked like fur.
I rolled out 2 black balls for the eyes, a pinch bigger ball for his nose, and a larger ball for the mouth. I flattened the mouth ball and shaped it into a mouth shape, with a connector piece for the nose. With a toothpick I poked two nose holes in the top of the nose and attached it to the mouth connector. A few chunks of white clay created the teeth, once again using a toothpick to create the desired look.
For the tongue, I flattened out an oval of red, pushed a toothpick down the middle, and curled it to suit.
Placed eyes.
Rolled out super thin lines of gold white and brown mix, and placed with toothpicks to create facial expression and hair for the back of the head.
Baked at 175 for 40 mins, and Viola!
Michaels
Extremely helpful staff, always smiling! Pricey items, but if you snag their 40-50 % off coupons in their flyer, you can buy most of your project items at reasonable prices…granted one piece at a time.
